18-14
IM 701210-06E
18.3 Self-Diagnostic Test (Self Test)
Executing the Printer Test
12. In step 4, select Printer.
13. Press the Test Exec soft key to execute the printer test.
Executing the Floppy Disk Drive, Zip Disk Drive, PC Card Drive, Internal HDD, or
SCSI Test
14. In step 4, select FDD, ZIP, PC CARD, HDD, or SCSI.
15. Press the Test Type soft key.
16. Turn the jog shuttle to set Test Type to #1.
17. Press the Test Exec soft key to execute the test selected in step 14.
Note
• Insert a floppy disk, a Zip disk, or a PC card before executing the floppy disk drive, Zip
disk drive, or PC card drive test.
• Note the following points when performing a SCSI test.
• Connect the SCSI device.
• Only test unpartitioned SCSI devices.
• Set the SCSI ID to 1.
• Test Item > Calib.Inf. is a menu for the service personnel (maintenance).
Printer test FDD test
Zip drive
test
PC card
drive test
Internal
HDD test SCSI test
To Next Page
Loading...
