What to do if the IP address is lost after a factory reset on my Barco Processor E2?
If the IP address is lost after a factory reset, it means the wrong mode of the factory reset command was used. Use the “Factory Reset, Save IP” choice in the “factory reset” sub-menu when you perform a factory reset.
How to troubleshoot web upgrade issues on Barco Processor E2?
To troubleshoot web upgrade issues, ensure that the Barco Processor E2 connection with the LAN is available and that there is internet access in the LAN.
General| 4K Support | Yes |
|---|---|
| Genlock | Yes |
| HDCP Support | Yes |
| Input Connectors | HDMI, DisplayPort, SDI |
| Output Connectors | HDMI, DisplayPort, SDI |
| Maximum Resolution | 4K/UHD at 60Hz |
| Redundancy | Optional |
| Control | Web UI |
Provides general safety instructions and information on compliance with international safety standards for IT equipment.
Details crucial safety guidelines to prevent personal injury and damage to the E2 unit during installation and operation.
Introduces the E2 as a modular scalable Digital Video Processor for live screen management.
Details the input/output capabilities, user interface, and processing specifications of the E2 system.
Describes the four methods for controlling the E2: Front Panel, EM GUI, Web Interface, and E2 Controller.
Details the steps and considerations for safely mounting the E2 chassis into a rack.
Illustrates and describes the components and controls of the E2's front panel interface.
Details the connectors and components located on the E2's rear panel, including AC connectors and Ethernet port.
Describes the system initialization process upon powering on the E2 unit.
Explains the conventions and rules for navigating and interacting with the E2's front panel menu system.
Details how to back up and restore E2 configuration files using the front panel USB port.
Covers E2 Ethernet settings, including DHCP query and static IP address configuration.
Details procedures for restoring the E2 to its factory default condition, with or without retaining IP settings.
Introduces the Configuration menu for editing Presentation Systems, adding devices, and modifying parameters.
Describes the Adjustment area for defining and adjusting unit-specific parameters, inputs, backgrounds, and outputs.
Details how to define and adjust unit-specific parameters in the Unit Configuration panel.
Explains how to assign input connectors and adjust parameters to match incoming signals.
Explains how to assign output connectors to configurations and adjust signal parameters for display devices.
Describes how to assign output configurations to destinations and manage destination formats.
Introduces the Programming menu for setting up events, assigning layers, backgrounds, and creating presets.
Describes the Adjustment area for configuring Layers, Sources, User Keys, and Presets.
Introduces the Multiviewer module for setting up and displaying multiple sources on monitors.
Provides access to the E2 web app for diagnostics, FAQ, contact info, and system backup/restore.
Provides access to card diagnostics software through submenus for inputs, outputs, expansion, and other components.
Allows users to download software updates and perform system backup or restore operations.
Details the process of upgrading the E2 system software via the 'Manage Software' function.
Explains how to back up presets, user keys, and system settings, and how to restore them.
Lists prerequisites for setting up the E2 system, including familiarity with menus and physical connection.
Details the steps to power up the E2 system and check its operational status.
Explains how to perform a factory reset to restore default input, output, and source mappings.
Guides users through setting up communication between the E2 and the local network via Ethernet.
Outlines the procedure for restoring the system configuration from a USB drive.
Provides detailed instructions for upgrading E2 firmware using a USB drive.
Explains how to upgrade E2 firmware using the web interface, checking for new versions.
Guides users through setting up the E2 and creating presets using the Event Master Control Software.
Details defining E2 components like inputs, backgrounds, outputs, and destinations within the software.
Explains how to assign layers, backgrounds, and create presets and user keys within the Programming menu.
Details the rear I/O and Link cards, including concerned parts and procedures for removing/installing them.
Provides instructions for removing and installing the power supply unit.
Details how to remove and install the System-Power board.
Provides detailed technical specifications for the E2 system, including dimensions, weight, and connectivity.
Explains how to remotely control the E2 via a telnet connection to its IP address.
Lists and describes available E2 remote control commands, such as ATRN and PRESET.
A list of common problems, their possible causes, and recommended remedies for the E2 system.
Provides an overview of the E2 warranty terms and conditions for Return Material Authorization (RMA).
To Next Page
