Task ID
OperationsTask ID
read, writel2vpn
Examples
The following example shows how to configure L2VPN pseudowire class sequencing:
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# l2vpn
RP/0/RSP0/CPU0:router(config-l2vpn)# pw-class kanata01
RP/0/RSP0/CPU0:router(config-l2vpn-pw)# encapsulation mpls
RP/0/RSP0/CPU0:router(config-l2vpn-encap-mpls)# sequencing both
Related Commands
DescriptionCommand
Enters pseudowire class submode to define a pseudowire class
template.
pw-class (L2VPN), on page 124
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
139
Point to Point Layer 2 Services Commands
sequencing (L2VPN)
To Next Page
Loading...
Need help?
General
