Cisco A9K-SIP-700 Reference Guide

ttl (l2vpn)
To configure Time to Live (TTL) for Pseudowire class, use the ttl command in L2VPN pseudowire class
encapsulation L2TPv3 configuration mode. To disable the TTL configuration, use the no form of this command.
ttl ttl _value
no ttl ttl_value
Syntax Description
The TTL Value. Range is from 1 to 255.
ttl_value
Command Default
None
Command Modes
L2VPN pseudowire class encapsulation L2TPv3 configuration
Command History
ModificationRelease
This command was introducedRelease 4.3.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
All L2VPN configurations can be deleted using the no l2vpn command.Note
Task ID
OperationTask ID
read, writel2vpn
Examples
This example shows how to configure TTL:
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# l2vpn
RP/0/RSP0/CPU0:router(config-l2vpn)# pw-class kanata01
RP/0/RSP0/CPU0:router(config-l2vpn-pwc)# encapsulation l2tpv3
RP/0/RSP0/CPU0:router(config-l2vpn-pwc-l2tpv3)# protocol l2tpv3
RP/0/RSP0/CPU0:router(config-l2vpn-pwc-l2tpv3)# ttl 40
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
225
Point to Point Layer 2 Services Commands
ttl (l2vpn)

Cisco A9K-SIP-700 Specifications

General

Brand	Cisco
Model	A9K-SIP-700
Category	Network Router
Language	English