vlan-id (MSTP)
To associate a set of VLAN IDs with the current MSTI, use the vlan-id command in MSTI configuration
submode.
vlan-id vlan-range [ vlan-range ] [ vlan-range ] [ vlan-range ]
Syntax Description
List of VLAN ranges in the form a-b, c, d, e-f, g etc.
vlan-range
Command Default
None
Command Modes
MSTI configuration
Command History
ModificationRelease
This command was introduced.Release 3.7.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationsTask ID
read, writeinterface
Examples
The following example shows how to use the vlan-id command:
RP/0/RSP0/CPU0:router(config-mstp-inst)# vlan-id 2-1005
Related Commands
DescriptionCommand
Enables debugging for sent and received MSTP packets.debug spanning-tree mst packet, on page 479
Enables debugging protocol-state changes such as port role or
state changes, topology change notification.
debug spanning-tree mst protocol-state, on
page 481
Enters the multiple spanning tree instance (MSTI)
configuration submode.
instance (MSTP), on page 517
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
645
Multiple Spanning Tree Protocol Commands
vlan-id (MSTP)
To Next Page
Loading...
Need help?
General
