control-word
To enable control word for MPLS encapsulation, use the control-word command in L2VPN pseudowire class
encapsulation submode. To disable the control word, use the no form of this command.
control-word
no control-word
Syntax Description
This command has no keywords or arguments.
Command Default
None
Command Modes
L2VPN pseudowire class encapsulation configuration
Command History
ModificationRelease
This command was introduced.Release 4.2.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationsTask ID
read, writel2vpn
Examples
This example shows how to enable control word for MPLS encapsulation:
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# l2vpn
RP/0/RSP0/CPU0:router(config-l2vpn)# pw-class pwc1
RP/0/RSP0/CPU0:router(config-l2vpn-pwc)# encapsulation mpls
RP/0/RSP0/CPU0:router(config-l2vpn-pwc-mpls)# control-word
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
76
Point to Point Layer 2 Services Commands
control-word
To Next Page
Loading...
Need help?
General
