show nve vni
To display list of all VNIs that are associated with various NVE interfaces and the associated multicast IP
address that is used for multi-destination frames, use the show nve vni command in EXEC mode.
show nve vni [vni_number| detail| interface nve nve-id]
Syntax Description
Displays output for the specific
VXLAN.
vni_number
Displays more detailed output.detail
Displays details for the specific
NVE interface.
interface nve nve-id
Command Default
None
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 5.2.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationTask ID
readtunnel
Examples
The following shows an example output of this show command:
RP/0/RSP0/CPU0:router# show nve vni
Interface VNI mcast VNI state
nve1 10.10 239.1.1.1 UP
nve2 11.10 239.1.1.1 UP
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
681
VXLAN Commands
show nve vni
To Next Page
Loading...
Need help?
General
