debug mmrp-flood-optimization protocol
To debug the flood optimization for PBB VPLS feature at the protocol level, use the debug
mmrp-flood-optimization protocol command in the EXEC mode.
debug mmrp-flood-optimization protocol [isid isid]
Syntax Description
Specifies the service instance identifier.isid
Service instance identifier.
isid
Command Default
None
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 5.1.2
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationTask ID
read, writeethernet-services
Examples
The following command shows how to use the debug mmrp-flood-optimization protocol command:
RP/0/RSP0/CPU0:router#debug mmrp-flood-optimization protocol isid 3
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
395
Provider Backbone Bridge Commands
debug mmrp-flood-optimization protocol
To Next Page
Loading...
Need help?
General
