show l2vpn ethernet ring g8032
To display an overview of the G.8032 ethernet ring configuration, use the show l2vpn ethernet ring g8032
command in EXEC mode.
show l2vpn ethernet ring g8032 [name] [brief| detail| instance ID| location| private| standby]
Syntax Description
Ethernet ring G.8032 name.
name
Brief information about the G.8032 ethernet ring configuration.
brief
Information in detail about the G.8032 ethernet ring configuration.detail
Instance number about the G.8032 ethernet ring configuration.
instanceID
Information about the G.8032 ethernet ring configuration for the specified
location.
location
Private information about the G.8032 ethernet ring configuration.private
Standby node specific informationstandby
Command Default
None
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 4.1.0
The location and standby keywords were added.Release 4.3.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationTask ID
readl2vpn
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
338
Multipoint Layer 2 Services Commands
show l2vpn ethernet ring g8032
To Next Page
Loading...
Need help?
General
