show l2vpn mstp vlan
To display the Multiple Spanning Tree Protocol (MSTP) state for the virtual local area network (VLAN) on
a given interface, use the show l2vpn mstp vlan command in EXEC mode.
show l2vpn mstp vlan [interface type interface-path-id] [msti value] [vlan-id value]
Syntax Description
(Optional) Displays the MSTP state for the given subinterface or base interface
name.
interface
(Optional) Interface type. For more information, use the question mark (?) online
help function.
type
(Optional) Physical interface or virtual interface.
Use the show interfaces command to see a list of all interfaces currently
configured on the router.
Note
For more information about the syntax for the router, use the question mark (?)
online help function.
interface-path-id
(Optional) Displays the filter for Multiple Spanning Tree Instance (MSTI). The
range is from 0 to 100.
msti value
(Optional) Displays the filter for the VLAN ID. The range is from 0 to 4294967295.
vlan-id value
Command Default
None
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 3.7.2
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationsTask ID
readl2vpn
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
587
Multiple Spanning Tree Protocol Commands
show l2vpn mstp vlan
To Next Page
Loading...
Need help?
General
