Examples
The following sample output is from the show l2vpn mstp port command:
RP/0/RSP0/CPU0:router# show l2vpn mstp port interface gigabitethernet 0/1/0/0 msti 5
Related Commands
DescriptionCommand
Enters the MSTP configuration submodespanning-tree mst, on page 623
Enters the MST Access Gateway configuration submode.spanning-tree mstag, on page 625
Enters the Per VLAN Rapid Spanning Tree Access Gateway
(PVRSTAG) configuration submode.
spanning-tree pvrstag, on page 629
Enters the Per VLAN Spanning Tree Access Gateway (PVSTAG)
configuration submode.
spanning-tree pvstag, on page 631
Enters the MSTP configuration submodespanning-tree mst, on page 623
Enters the MST Access Gateway configuration submode.spanning-tree mstag, on page 625
Displays the Multiple Spanning Tree Protocol (MSTP) state for
the virtual local area network (VLAN) on a given interface.
show l2vpn mstp vlan, on page 587
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
586
Multiple Spanning Tree Protocol Commands
show l2vpn mstp port
To Next Page
Loading...
Need help?
General
