show ethernet mvrp statistics
To display packet statistics per port, use the show ethernet mvrp statistics command in EXEC mode.
show ethernet mvrp statistics [interface type interface-path-id]
Syntax Description
(Optional) Displays the MVRP state for the given subinterface or base interface
name.
interface
(Optional) Interface type. For more information, use the question mark (?) online
help function.
type
(Optional) Physical interface or virtual interface.
Use the show interfaces command to see a list of all interfaces currently
configured on the router.
Note
For more information about the syntax for the router, use the question mark (?) online
help function.
interface-path-id
Command Default
None
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 3.7.2
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationsTask ID
readethernet-services
Examples
The following sample output is from the show ethernet mvrp statistics command:
RP/0/RSP0/CPU0:router# show ethernet mvrp statistics interface GigabitEthernet 0/1/0/1
GigabitEthernet0/1/0/1
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
581
Multiple Spanning Tree Protocol Commands
show ethernet mvrp statistics
To Next Page
Loading...
Need help?
General
