open ring
To specify Ethernet ring g8032 as an open ring, use the open-ring command in Ethernet ring g8032
configuration submode. To delete, use the no form of this command.
open-ring
no open-ring
This command has no keywords or arguments.
Command Default
The default value is FALSE.
Command Modes
Ethernet ring g8032 configuration submode
Command History
ModificationRelease
This command was introduced.Release 4.1.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationTask ID
read, writel2vpn
Examples
This example shows the output from the open-ring command:
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# l2vpn
RP/0/RSP0/CPU0:router(config-l2vpn)# ethernet ring g8032 g1
RP/0/RSP0/CPU0:router(config-l2vpn-erp)# open-ring
RP/0/RSP0/CPU0:router(config-l2vpn-erp)#
Related Commands
DescriptionCommand
Enters L2VPN configuration mode.l2vpn, on page 100
Enables G.8032 ring mode and enters the G.8032 configuration
submode.
ethernet ring g8032, on page 251
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
297
Multipoint Layer 2 Services Commands
open ring
To Next Page
Loading...
Need help?
General
