show l2vpn forwarding ethernet ring g8032
To display an overview of the G.8032 ethernet ring configuration from L2Forwarding Information Base
(L2FIB) process, use the show l2vpn forwarding ethernet ring g8032 command in EXEC mode.
show l2vpn forwarding ethernet ring g8032 name [detail| instance ID| location| private]
Syntax Description
Ethernet ring G.8032 name.
name
Information in detail about the G.8032 ethernet ring configuration.detail
Instance number about the G.8032 ethernet ring configuration.
instanceID
Location specified in the rack/slot/module notation.location
Private information about the G.8032 ethernet ring configuration.private
Command Default
None
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 4.1.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationTask ID
readl2vpn
Examples
This example shows the output from the show l2vpn forwarding ethernet ring g8032 command:
# show l2vpn forwarding ethernet ring g8032 private location <r/s/i>
Ethernet ring g8032 foo (task-id = cisco-support)
Port0: GigabitEthernet0/1/2/0
Monitor: none
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
353
Multipoint Layer 2 Services Commands
show l2vpn forwarding ethernet ring g8032
To Next Page
Loading...
Need help?
General
