show l2tp session
To display information about L2TP sessions, use the show l2tp session command in EXEC mode.
show l2tp session [detail| brief| interworking| circuit| sequence| state] {id id| name name}
Syntax Description
(Optional) Displays summary output for a session.brief
(Optional) Displays attachment circuit information for a session.circuit
(Optional) Displays detailed output for a session.detail
(Optional) Displays interworking information for a session.interworking
(Optional) Displays data packet sequencing information for a session.sequence
(Optional) Displays control plane state information for a session.state
Configures the local tunnel ID. Range is 0 to 4294967295.
id id
Configures the tunnel name.
name name
Command Default
None
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 6.1.2
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationsTask ID
read, writel2vpn
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
153
Point to Point Layer 2 Services Commands
show l2tp session
To Next Page
Loading...
Need help?
General
