evpn
To enter EVPN configuration mode, use the evpn command in the global configuration mode. To return to
the global configuration mode, use the no form of this command.
evpn [bgp | evi | interface | timers]
no evpn [bgp | evi | interface | timers]
Syntax Description
Configures BGP.bgp
Configures Ethernet VPN ID (EVI).evi
Assigns an interface to EVPN.interface
Configures global EVPN timers.timers
Command Default
None.
Command Modes
Global configuration
Command History
ModificationRelease
This command was introduced.Release 4.3.2
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationTask ID
read, writel2vpn
Examples
This example shows how to enter the EVPN configuration mode:
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# evpn
RP/0/RSP0/CPU0:router(config-evpn)#
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
400
Provider Backbone Bridge Commands
evpn
To Next Page
Loading...
Need help?
General
