join-time
To set the join time for all active ports, use the join-time command in the MVRP configuration mode. To
return to the default value, use the no form of this command.
join-time interval
no join-time interval
Syntax Description
Maximum time for the join timer parameter for all active ports. The range is from
100 to 1000. The default value is 200.
interval
Command Default
The default is 200 milliseconds.
Command Modes
MVRP configuration
Command History
ModificationRelease
This command was introduced.Release 3.9.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationsTask ID
read, writeethernet-services
Examples
The following example shows how to configure the join time for active ports:
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# spanning-tree mst AA
RP/0/RSP0/CPU0:router(config-mstp)# mvrp static
RP/0/RSP0/CPU0:router(config-mvrp)# periodic transmit interval 5
RP/0/RSP0/CPU0:router(config-mvrp)# join-time 200
!
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
531
Multiple Spanning Tree Protocol Commands
join-time
To Next Page
Loading...
Need help?
General
