show l2vpn forwarding
To display forwarding information from the layer2_fib manager on the line card, use the show l2vpn
forwarding command in EXEC mode.
show l2vpn forwarding {xconnect| bridge-domain| counter| debug | detail| dhcp binding| ethernet ring
g8032| gsp| hardware| inconsistent| interface| l2tp| l2tpv2| location [ node-id ]| message| monitor-session|
mstp| neighbor| object-queues| pbb| protection| pwgroup| resource| retry-list| summary| unresolved}
Syntax Description
Displays the cross-connect related
information.
xconnect
Displays bridge domain related
forwarding information.
bridge-domain
Displays the cross-connect
counters.
counter
Displays debug information.debug
Displays detailed information from
the layer2_fib manager.
detail
Displays DHCP binding related
forwarding information
dhcp binding
Displays Ethernet associated
configuration information.
ethernet ring g8032
Displays GSP related forwarding
information.
gsp
Displays hardware-related
layer2_fib manager information.
hardware
Displays inconsistent entries only.inconsistent
Displays the match AC
subinterface.
interface
Displays L2TPv3 related
forwarding information.
l2tp
Displays l2tpv2 related forwarding
information.
l2tpv2
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
170
Point to Point Layer 2 Services Commands
show l2vpn forwarding
To Next Page
Loading...
Need help?
General
