show l2vpn discovery
To display discovery label block information, use the show l2vpn discovery command in EXEC mode.
show l2vpn discovery {bridge-domain| xconnect| summary| private}
Syntax Description
Displays bridge domain related forwarding information.bridge-domain
Displays VPWS edge information.xconnect
Displays summary information.summary
Displays private log or trace information.private
Command Default
None
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 3.7.2
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationsTask ID
read, writel2vpn
Examples
The following examples display output for the show l2vpn discovery command with bridge-domain filter:
RP/0/RSP0/CPU0:router#show l2vpn discovery bridge-domain
Service Type: VPLS, Connected
List of VPNs (8001 VPNs):
Bridge group: bg1, bridge-domain: bg1_bd1, id: 0, signaling protocol: LDP
VPLS-ID: (auto) 1:101
Local L2 router id: 10.10.10.10
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
168
Point to Point Layer 2 Services Commands
show l2vpn discovery
To Next Page
Loading...
Need help?
General
