clear ethernet mvrp statistics
To clear MVRP statistics for ethernet interfaces, use the clear ethernet mvrp statistics command in the
EXEC mode.
clear ethernet mvrp statistics {interface type interface-path-id| location location| all}
Syntax Description
(Optional) Clears the MVRP statistics for the given interface.interface
Interface type. For more information, use the question mark (?) online help
function.
type
Physical interface or virtual interface.
Use the show interfaces command to see a list of all interfaces currently
configured on the router.
Note
For more information about the syntax for the router, use the question mark (?)
online help function.
interface-path-id
Clears MVRP statistics for interfaces in a particular location.location
Specifies the fully qualified location.
location
Clears the MVRP statistics for all interfaces.all
Command Default
None
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 3.9.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationsTask ID
executeethernet-services
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
471
Multiple Spanning Tree Protocol Commands
clear ethernet mvrp statistics
To Next Page
Loading...
Need help?
General
