address-family l2vpn mspw
To specify the L2VPN address family of the neighbor and to enter the address family configuration mode,
use the address-family l2vpn mspw in the BGP configuration mode.
address-family l2vpn mspw
Syntax Description
This command has no keywords or arguments.
Command Default
None
Command Modes
BGP configuration
Command History
ModificationRelease
This command was introduced.Release 5.1.2
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationTask ID
read, writebgp
Examples
The following example shows how to enter the address family configuration mode.
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# router bgp 100
RP/0/RSP0/CPU0:router(config-bgp)# address-family l2vpn mspw
RP/0/RSP0/CPU0:router(config-bgp-af)#
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
64
Point to Point Layer 2 Services Commands
address-family l2vpn mspw
To Next Page
Loading...
Need help?
General
