clear l2vpn collaborators
To clear the state change counters for L2VPN collaborators, use the clear l2vpn collaborators command in
EXEC mode.
clear l2vpn collaborators
Syntax Description
This command has no arguments or keywords.
Command Default
None
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 3.7.2
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationsTask ID
read, writel2vpn
Examples
The following example shows how to clear change counters for L2VPN collaborators:
RP/0/RSP0/CPU0:router# clear l2vpn collaborators
Related Commands
DescriptionCommand
Displays information about the state of the interprocess
communications connections between l2vpn_mgr and other processes.
show l2vpn collaborators, on page 163
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
70
Point to Point Layer 2 Services Commands
clear l2vpn collaborators
To Next Page
Loading...
Need help?
General
