clear l2vpn counters bridge mac-withdrawal
To clear the MAC withdrawal statistics for the counters of the bridge domain, use the clear l2vpn counters
bridge mac-withdrawal command in EXEC mode.
clear l2vpn counters bridge mac-withdrawal {all| group group-name bd-name bd-name| neighbor
ip-address pw-id value}
Syntax Description
Clears the MAC withdrawal statistics over all the bridges.all
Clears the MAC withdrawal statistics over the specified group.
group group-name
Clears the MAC withdrawal statistics over the specified bridge.
bd-name bd-name
Clears the MAC withdrawal statistics over the specified neighbor.
neighbor ip-address
Clears the MAC withdrawal statistics over the specified pseudowire. The
range is from 1 to 4294967295.
pw-id value
Command Default
None
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 3.7.2
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationsTask ID
read, writel2vpn
Examples
The following example shows how to clear the MAC withdrawal statistics over all the bridges:
RP/0/RSP0/CPU0:router# clear l2vpn counters bridge mac-withdrawal all
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
71
Point to Point Layer 2 Services Commands
clear l2vpn counters bridge mac-withdrawal
To Next Page
Loading...
Need help?
General
