maximum age
To set the maximum age parameter for the bridge, use the maximum age command in MSTP configuration
submode.
maximum age seconds
Syntax Description
Maximum age time for the bridge in seconds. Range is 6 to 40.
seconds
Command Default
seconds: 20
Command Modes
MSTP configuration
Command History
ModificationRelease
This command was introduced.Release 3.7.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationsTask ID
read, writeinterface
Examples
The following example shows how to set the maximum age time for the bridge to 40:
RP/0/RSP0/CPU0:router(config-mstp)# maximum age 40
Related Commands
DescriptionCommand
Enters the MSTP configuration submodespanning-tree mst, on page 623
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
543
Multiple Spanning Tree Protocol Commands
maximum age
To Next Page
Loading...
Need help?
General
