show evpn ethernet-segment
To display the EVPN Ethernet segment information, use the show evpn ethernet-segment command in the
EXEC mode.
show evpn ethernet-segment[detail | esi | interface | location | private | standby ]
Syntax Description
Displays detailed information.detail
Filters by Ethernet Segment identifier.esi
Filters by interface name.interface
Displays location specific information.location
Displays private information.private
Displays standby node specific information.standby
Command Default
None.
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 4.3.2
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationTask ID
readl2vpn
Examples
This sample output shows the EVPN Ethernet segment with interface filter:
RP/0/RSP0/CPU0:router#show evpn ethernet-segment interface gigabitethernet 0/3/0/0 detail
Ethernet Segment Id Interface Nexthops
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
433
Provider Backbone Bridge Commands
show evpn ethernet-segment
To Next Page
Loading...
Need help?
General
