Cisco A9K-SIP-700 Reference Guide

generic-interface-list
To configure generic interface list, use the generic-interface-list command in global configuration mode.
generic-interface-list list-name
Syntax Description
Name of the interface list.
list-name
Command Default
None
Command Modes
Global configuration
Command History
ModificationRelease
This command was introduced.Release 4.2.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationTask ID
read, writel2vpn
Examples
This example shows how to configure generic interface list:
RP/0/RSP0/CPU0:router# config
RP/0/RSP0/CPU0:router(config)# generic-interface-list interfacelist1
RP/0/RSP0/CPU0:router(config-if-list)# interface GigabitEthernet 0/2/0/1
RP/0/RSP0/CPU0:router(config-if-list)# interface GigabitEthernet 0/3/0/1
RP/0/RSP0/CPU0:router(config-if-list)# exit
Related Commands
DescriptionCommand
Displays all the L2VPN virtual interfaces.show l2vpn generic-interface-list, on page 185
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
81
Point to Point Layer 2 Services Commands
generic-interface-list

Cisco A9K-SIP-700 Specifications

General

Brand	Cisco
Model	A9K-SIP-700
Category	Network Router
Language	English