maximum hops (MSTP)
To set the maximum hops parameters for the bridge, use the maximum hops command in MSTP configuration
submode.
maximum hops hops
Syntax Description
Maximum number of hops for the bridge in seconds. Range is 6 to 40.
hops
Command Default
hops: 20
Command Modes
MSTP configuration
Command History
ModificationRelease
This command was introduced.Release 3.7.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationsTask ID
read, writeinterface
Examples
The following example shows how to set the maximum number of hops for the bridge to 30:
RP/0/RSP0/CPU0:router(config-mstp)# max hops 30
Related Commands
DescriptionCommand
Enables debugging for sent and received MSTP packets.debug spanning-tree mst packet, on page 479
Enables debugging protocol-state changes such as port role
or state changes, topology change notification.
debug spanning-tree mst protocol-state, on
page 481
Enters the MSTP configuration submodespanning-tree mst, on page 623
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
544
Multiple Spanning Tree Protocol Commands
maximum hops (MSTP)
To Next Page
Loading...
Need help?
General
