show l2vpn provision queue
To display L2VPN configuration provisioning queue information, use the show l2vpn provision queue
command in EXEC mode.
show l2vpn provision queue [location| standby]
Syntax Description
(Optional) Displays L2VPN configuration provisioning queue information for
the specified location.
location
(Optional) Displays Standby node specific information.standby
Command Default
None
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 4.3.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationTask ID
readl2vpn
Examples
The following example displays output for the show l2vpn provision queue command:
RP/0/RSP0/CPU0:router# show l2vpn provision queue
Legend: P/P/R = Priority/Provisioned/Require Provisioning.
Configuration Item Object Type Class P/P/R Object
Key
-------------------------- ------------------------ ---------------------- -----
----------
BD_NAME bd_t vpls_bd_class 0/0/0 BD
VPLS01
BD_NAME bd_t vpls_bd_class 0/0/0 BD
VPLS02
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
193
Point to Point Layer 2 Services Commands
show l2vpn provision queue
To Next Page
Loading...
Need help?
General
