show l2vpn forwarding bridge pbb
To display the PBB bridge forwarding information, use the show l2vpn forwarding bridge pbb command
in EXEC mode.
show l2vpn forwarding bridge pbb core [debug| detail| hardware| location| private]| edge [core-bridge|
debug| detail| hardware| location| private]| i-sid service-id [debug| detail| hardware| location| private]
Syntax Description
Displays the debug information.debug
Displays the PBB core.core
Displays the PBB edge.edge
Displays the service instance identifier.
i-sid service-id
Displays brief information about the PBB core, edge or service instance
identifier.
brief
Displays detailed information about the PBB core, edge or service instance
identifier.
detail
Displays hardware information.hardware
Displays private information about the PBB core, edge or service instance
identifier.
private
Displays the name of the core-bridge domain connected to the edge-bridge
domain.
core-bridge
Command Default
None
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 3.9.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
449
Provider Backbone Bridge Commands
show l2vpn forwarding bridge pbb
To Next Page
Loading...
Need help?
General
