revision (MSTP)
To set the revision level of the MSTP region, use the revision command in MSTP configuration submode.
revision revision-number
Syntax Description
Revision level of the MSTP region. Range is 0 to 65535.
revision-number
Command Default
revision-number: 0
Command Modes
MSTP configuration
Command History
ModificationRelease
This command was introduced.Release 3.7.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationsTask ID
read, writeinterface
Examples
The following example shows how to set the revision level of the MSTP region to 10:
RP/0/RSP0/CPU0:router(config-mstp)# revision 10
Related Commands
DescriptionCommand
Enables debugging for sent and received MSTP packets.debug spanning-tree mst packet, on page 479
Enables debugging protocol-state changes such as port role
or state changes, topology change notification.
debug spanning-tree mst protocol-state, on
page 481
Enters the MSTP configuration submodespanning-tree mst, on page 623
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
571
Multiple Spanning Tree Protocol Commands
revision (MSTP)
To Next Page
Loading...
Need help?
General
