DescriptionCommand
Enter the MSTAG interface configuration submode, and enables
MSTAG for the specified port.
interface (MSTAG/REPAG), on page 523
Enters the MST Access Gateway configuration submode.spanning-tree mstag, on page 625
Enters the Resilient Ethernet Protocol Access Gateway
(REPAG) configuration submode.
spanning-tree repag, on page 633
Displays the values currently used for populating the BPDUs
sent by all ports.
show spanning-tree mstag, on page 604
Displays the values currently used for populating the BPDUs
sent by all ports.
show spanning-tree repag, on page 617
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
570
Multiple Spanning Tree Protocol Commands
revision (MSTAG/REPAG)
To Next Page
Loading...
Need help?
General
