clear l2vpn forwarding counters bridge-domain mirp-lite
To clear L2VPN forwarding MIRP counters, use the clear l2vpn forwarding counters bridge-domain
mirp-lite command in EXEC mode.
clear l2vpn forwarding counters bridge-domain mirp-lite {location node-id}
Syntax Description
Clears the L2VPN forwarding MIRP counters for the specified location.
location node-id
Command Default
None
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 4.3.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationTask ID
read, write, executel2vpn
Examples
This example shows how to clear all the MIRP counters:
RP/0/RSP0/CPU0:router# clear l2vpn forwarding counters bridge-domain mirp-lite location
0/1/CPU0
This example shows how to clear bridge-domain specific MIRP counters:
RP/0/RSP0/CPU0:router# clear l2vpn forwarding counters bridge-domain bg1:bd1 mirp-lite
location 0/1/CPU0
Related Commands
DescriptionCommand
Clears L2VPN forwarding counters.clear l2vpn forwarding counters, on page 72
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
73
Point to Point Layer 2 Services Commands
clear l2vpn forwarding counters bridge-domain mirp-lite
To Next Page
Loading...
Need help?
General
