instance (MSTP)
To enter the multiple spanning tree instance (MSTI) configuration submode, use the instance command in
MSTP configuration submode.
instance id
Syntax Description
MSTI ID. Range is 0 to 4094.
id
Command Default
None
Command Modes
MSTP configuration
Command History
ModificationRelease
This command was introduced.Release 3.7.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
An instance ID of 0 represents the CIST for the region.Note
Task ID
OperationsTask ID
read, writeinterface
Examples
The following example shows how to enter the MSTI configuration submode:
RP/0/RSP0/CPU0:router(config-mstp)# instance 101
RP/0/RSP0/CPU0:router(config-mstp-inst)#
Related Commands
DescriptionCommand
Enables debugging for sent and received MSTP packets.debug spanning-tree mst packet, on page 479
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
517
Multiple Spanning Tree Protocol Commands
instance (MSTP)
To Next Page
Loading...
Need help?
General
