DescriptionCommand
Enables debugging protocol-state changes such as port role
or state changes, topology change notification.
debug spanning-tree mst protocol-state, on
page 481
Sets the bridge priority for the current MSTIpriority (MSTP), on page 564
Displays the multiple spanning tree protocol status
information.
show spanning-tree mst, on page 589
Enters the MSTP configuration submodespanning-tree mst, on page 623
Associates a set of VLAN IDs with the current MSTI.vlan-id (MSTP), on page 645
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
518
Multiple Spanning Tree Protocol Commands
instance (MSTP)
To Next Page
Loading...
Need help?
General
