show l2vpn database
To display L2VPN database, use the show l2vpn database command in EXEC mode.
show l2vpn database {ac| node}
Syntax Description
Displays L2VPN Attachment Circuit (AC) databaseac
Displays L2VPN node database.node
Command Default
None
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 4.3.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationTask ID
readl2vpn
Examples
The following example displays output for the show l2vpn database ac command:
RP/0/RSP0/CPU0:router# show l2vpn database ac
Bundle-Ether1.1:
Other-Segment MTU: 0
Other-Segment status flags: 0x0
Signaled capability valid: No
Signaled capability flags: 0x0
Configured capability flags: 0x0
XCID: 0xffffffff
PSN Type: Undefined
ETH data:
Xconnect tags: 0
Vlan rewrite tag: 0
AC defn:
ac-ifname: Bundle-Ether1.1
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
165
Point to Point Layer 2 Services Commands
show l2vpn database
To Next Page
Loading...
Need help?
General
