show l2vpn pbb backbone-source-mac
To display the provider backbone source MAC information, use the show l2vpn pbb backbone-source-mac
command in EXEC mode.
show l2vpn pbb backbone-source-mac
Syntax Description
This command has no keywords or arguments.
Command Default
None
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 3.9.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationsTask ID
readl2vpn
Examples
The following example shows the output from the show l2vpn pbb backbone-source-mac command:
#show l2vpn pbb backbone-source-mac
0111.0222.0333
Related Commands
DescriptionCommand
Configures the provider backbone bridge core or edge.pbb, on page 420
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
453
Provider Backbone Bridge Commands
show l2vpn pbb backbone-source-mac
To Next Page
Loading...
Need help?
General
