instance (MSTAG/REPAG)
To enter MSTAG Instance configuration mode or REPAG Instance configuration mode, use the instance
command in MSTAG Interface or REPAG Interface configuration mode respectively.
instance id
Syntax Description
MSTI ID. Range is 0 to 4094.
id
Command Default
None
Command Modes
MST AG interface configuration, REPAG interface configuration
Command History
ModificationRelease
This command was introduced.Release 3.7.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
An instance ID of 0 represents the IST for the region.Note
Task ID
OperationsTask ID
read, writeinterface
Examples
The following example shows how to enter MSTAG Instance configuration submode:
RP/0/RSP0/CPU0:router(config-mstag)# instance 101
RP/0/RSP0/CPU0:router(config-mstag-inst)#
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
515
Multiple Spanning Tree Protocol Commands
instance (MSTAG/REPAG)
To Next Page
Loading...
Need help?
General
