instance cost
To set the internal path cost for a given instance on the current port, use the instance cost command in MSTP
interface configuration submode.
instance id cost cost
Syntax Description
MSTI ID. Range is 0 to 4094.
id
Port cost. Range is 1 to 200000000.
cost
Command Default
The default path cost depends on the speed of the link.
Command Modes
MSTP interface configuration
Command History
ModificationRelease
This command was introduced.Release 3.7.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
An instance ID of 0 represents the IST for the region.Note
Task ID
OperationsTask ID
read, writeinterface
Examples
The following example shows how to set the port cost to 10000 for the instance ID 101:
RP/0/RSP0/CPU0:router(config-mstp-if)# instance 101 cost 10000
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
519
Multiple Spanning Tree Protocol Commands
instance cost
To Next Page
Loading...
Need help?
General
