clear mmrp-flood-optimization statistics
To clear the stored MRP protocol statistics on all the pseudowires or a specific pseudowire, use the clear
mmrp-flood-optimization statistics command in the EXEC mode.
clear mmrp-flood-optimization statistics {all| pw pw-ID neighbor}
Syntax Description
Clear the stored MRP protocol
statistics on all the pseudowires.
all
Indicates a specific pseudowire.pw
Indicates the IP address of the
neighbor.
neighbor
Indicates the pseudowire ID.
pw-id
Command Default
None
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 5.1.2
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationTask ID
read, writeethernet-services
Examples
The following command shows how to clear the MMRP flood optimization statistics:
RP/0/RSP0/CPU0:router#clear mmrp-flood-optimization statistics all
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
391
Provider Backbone Bridge Commands
clear mmrp-flood-optimization statistics
To Next Page
Loading...
Need help?
General
