Cisco A9K-SIP-700 Reference Guide

ethernet ring g8032
To enable G.8032 ring mode and enter the G.8032 configuration submode, use the ethernet ring g8032
command in the L2VPN configuration mode. To disable the G.8032 ring mode, use the no form of this
command.
ethernet ring g8032 protocol ring identifier
no ethernet ring g8032 protocol ring identifier
Syntax Description
Ring profile name. The maximum size of the profile name is 32
characters.
protocol ring identifier
Command Default
None
Command Modes
L2VPN configuration mode
Command History
ModificationRelease
This command was introduced.Release 4.1.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationTask ID
read, writel2vpn
Examples
This example shows how to enable the G.8032 ring mode:
RP/0/RSP0/CPU0:router#configure
RP/0/RSP0/CPU0:router(config)#l2vpn
RP/0/RSP0/CPU0:router(config-l2vpn)#ethernet ring g8032 p1
RP/0/RSP0/CPU0:router(config-l2vpn-erp)#
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
251
Multipoint Layer 2 Services Commands
ethernet ring g8032

Cisco A9K-SIP-700 Specifications

General

Brand	Cisco
Model	A9K-SIP-700
Category	Network Router
Language	English