shutdown (GRE)
To shut down any interface, use the shutdown command in interface configuration mode. To start the interface,
use the no form of the command.
This is a Generic Routing Encapsulation (GRE) command.
shutdown
no shutdown
This command has no keywords or arguments.
Command Default
None
Command Modes
Interface configuration
Command History
ModificationRelease
This command was introduced.Release 4.2.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationTask ID
read, writeinterface
Examples
This example shows how to shut down a given interface:
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# interface tunnel-ip 789
RP/0/RSP0/CPU0:router(config-if)# shutdown
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
42
Generic Routing Encapsulation Commands
shutdown (GRE)
To Next Page
Loading...
Need help?
General
