show l2vpn
To display L2VPN information, use the show l2vpn command in EXEC mode.
show l2vpn
Syntax Description
This command has no keywords or arguments.
Command Default
None
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 4.3.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationTask ID
readl2vpn
Examples
The following example displays output for the show l2vpn command. The output provides an overview of
the state of the globally configured features.
RP/0/RSP0/CPU0:router# show l2vpn
Mon May 7 15:01:17.963 BST
PW-Status: disabled
PW-Grouping: disabled
Logging PW: disabled
Logging BD state changes: disabled
Logging VFI state changes: disabled
Logging NSR state changes: disabled
TCN propagation: disabled
PWOAMRefreshTX: 30s
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
158
Point to Point Layer 2 Services Commands
show l2vpn
To Next Page
Loading...
Need help?
General
