Cisco A9K-SIP-700 Reference Guide

instance port-priority
To set the port priority performance parameter for the MSTI, use the instance port-priority command in
MSTP interface configuration submode.
instance id port-priority priority
Syntax Description
MSTI ID. Range is 0 to 4094.
id
Port priority. Range is 0 to 240 in multiples of 16.
priority
Command Default
priority: 128
Command Modes
MSTP interface configuration
Command History
ModificationRelease
This command was introduced.Release 3.7.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
An instance ID of 0 represents the CIST for the region.Note
Task ID
OperationsTask ID
read, writeinterface
Examples
The following example shows how to set the port priority to 160 for the instance ID 101:
RP/0/RSP0/CPU0:router(config-mstp-if)# instance 101 port-priority 160
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
521
Multiple Spanning Tree Protocol Commands
instance port-priority

Cisco A9K-SIP-700 Specifications

General

Brand	Cisco
Model	A9K-SIP-700
Category	Network Router
Language	English