Examples
The following example shows how to configure the bringup delay:
RP/0/RSP0/CPU0:router# clear ethernet mvrp statistics all
Related Commands
DescriptionCommand
Enables Multiple VLAN Registration Protocol (MVRP) in
static mode.
mvrp static, on page 546
Displays packet statistics per port.show ethernet mvrp statistics, on page 581
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
472
Multiple Spanning Tree Protocol Commands
clear ethernet mvrp statistics
To Next Page
Loading...
Need help?
General
