The following example displays output for the show generic-interface-list retry private command:
RP/0/RSP0/CPU0:router# show generic-interface-list retry private
Thu Aug 2 14:20:42.883 CDT
total: 0 items
The following example displays output for the show generic-interface-list standby command:
RP/0/RSP0/CPU0:router# show generic-interface-list standby
Thu Aug 2 14:25:01.749 CDT
generic-interface-list: nsrIL (ID: 0, interfaces: 2)
Bundle-Ether2 - items pending 0, NOT downloaded to FIB
GigabitEthernet0/0/0/1 - items pending 0, NOT downloaded to FIB
Number of items: 0
List is not downloaded to FIB
Related Commands
DescriptionCommand
Enters L2VPN configuration mode.l2vpn, on page 100
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
152
Point to Point Layer 2 Services Commands
show generic-interface-list
To Next Page
Loading...
Need help?
General
