Cisco A9K-SIP-700 Reference Guide

RP/0/RSP0/CPU0:router(config-if)# dot1q tunneling ethertype 0x9100
RP/0/RSP0/CPU0:router(config-if)#
The following example shows how to configure the Ethertype to 0x9200:
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# interface GigabitEthernet 0/1/5/1
RP/0/RSP0/CPU0:router(config-if)# dot1q tunneling ethertype 0x9200
RP/0/RSP0/CPU0:router(config-if)#
Related Commands
DescriptionCommand
Defines the matching criteria to map 802.1Q frames ingress on an
interface to the appropriate service instance.
encapsulation dot1q, on page 8
Defines the matching criteria to be used in order to map single-tagged
802.1ad frames ingress on an interface to the appropriate service
instance.
encapsulation dot1ad dot1q, on page
6
Defines the matching criteria to map Q-in-Q ingress frames on an
interface to the appropriate service instance.
encapsulation dot1q second-dot1q, on
page 10
Defines the matching criteria to map untagged ingress Ethernet frames
on an interface to the appropriate service instance.
encapsulation untagged, on page 12
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
3
Ethernet Interfaces Commands
dot1q tunneling ethertype

Cisco A9K-SIP-700 Specifications

General

Brand	Cisco
Model	A9K-SIP-700
Category	Network Router
Language	English