DescriptionCommand
Defines the matching criteria to be used in order to map single-tagged
802.1ad frames ingress on an interface to the appropriate service
instance.
encapsulation dot1ad dot1q, on page
6
Defines the matching criteria to map Q-in-Q ingress frames on an
interface to the appropriate service instance.
encapsulation dot1q second-dot1q, on
page 10
Defines the matching criteria to map untagged ingress Ethernet frames
on an interface to the appropriate service instance.
encapsulation untagged, on page 12
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
5
Ethernet Interfaces Commands
encapsulation default
To Next Page
Loading...
Need help?
General
