EasyManuals Logo

Cisco A9K-SIP-700 Reference Guide

Cisco A9K-SIP-700
696 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #194 background imageLoading...
Page #194 background image
MPLS, Destination address: 2.2.2.2, pw-id: 101, status: Bound
Pseudowire label: 16002 Control word disabled
Statistics:
packets: received 0, sent 0
bytes: received 0, sent 0
Segment 2
Bridge id: 0, Split horizon group id: 1
Storm control: disabled
MAC learning: enabled
MAC port down flush: enabled
Flooding:
Broadcast & Multicast: enabled
Unknown unicast: enabled
MAC aging time: 300 s, Type: inactivity
MAC limit: 4000, Action: none, Notification: syslog
MAC limit reached: no
MAC Secure: disabled, Logging: disabled
DHCPv4 snooping: profile not known on this node, disabled
Dynamic ARP Inspection: disabled, Logging: disabled
IP Source Guard: disabled, Logging: disabled
IGMP snooping profile: profile not known on this node
Router guard disabled
P2MP PW enabled
This example shows sample output for the show l2vpn forwarding detail location command with P2MP
PW enabled on the PW BP for IOS-XR 5.3.2 release.
RP/0/RSP0/CPU0:router# show l2vpn forwarding detail location
Xconnect id: 0xfffc0003, Status: up
Segment 1
MPLS, Destination address: 2.2.2.2, pw-id: 101, status: Bound
Pseudowire label: 16002 Control word disabled
Statistics:
packets: received 1000 (unicast 1000), sent 0
bytes: received 128000 (unicast 128000), sent 0
MAC move: 10
Segment 2
Bridge id: 0, Split horizon group id: 1
Storm control: disabled
MAC learning: enabled
MAC port down flush: enabled
Flooding:
Broadcast & Multicast: enabled
Unknown unicast: enabled
MAC aging time: 300 s, Type: inactivity
MAC limit: 4000, Action: none, Notification: syslog
MAC limit reached: no
MAC Secure: disabled, Logging: disabled
DHCPv4 snooping: profile not known on this node, disabled
Dynamic ARP Inspection: disabled, Logging: disabled
IP Source Guard: disabled, Logging: disabled
IGMP snooping profile: profile not known on this node
Router guard disabled
P2MP PW enabled
This example shows sample output for the show l2vpn forwarding summary location command displaying
number of bridge-domains with P2MP PW enabled.
RP/0/RSP0/CPU0:router# show l2vpn forwarding summary location
Mon Sep 9 22:07:54.000 EDT
Major version num:1, minor version num:0
Shared memory timestamp:0x547395c50
Global configuration:
Number of forwarding xconnect entries:5
Up:0 Down:5
AC-PW(atom):1 AC-PW(l2tpv2):0 AC-PW(l2tpv3):0
(1 mpls) AC-AC:0 AC-BP:0 AC-Unknown:0
PW-BP:4 PW-Unknown:0
PBB-BP:0 PBB-Unknown:0
Monitor-Session-PW:0 Monitor-Session-Unknown:0
Number of xconnects down due to:
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
180
Point to Point Layer 2 Services Commands
show l2vpn forwarding

Table of Contents

Other manuals for Cisco A9K-SIP-700

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco A9K-SIP-700 and is the answer not in the manual?

Cisco A9K-SIP-700 Specifications

General IconGeneral
BrandCisco
ModelA9K-SIP-700
CategoryNetwork Router
LanguageEnglish

Related product manuals