Related Commands
DescriptionCommands
Establishes a bridge domain and enters L2VPN bridge
group bridge domain configuration mode.
bridge-domain (VPLS), on page 240
Creates a bridge group so that it can contain bridge
domains and then assigns network interfaces to the
bridge domain.
bridge group (VPLS), on page 242
Enters L2VPN configuration mode.l2vpn, on page 100
Enters L2VPN bridge group bridge domain MAC
configuration mode.
mac (VPLS), on page 277
Configures the maximum aging time.time (VPLS), on page 374
Configures the type for MAC address aging.type (VPLS), on page 378
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
235
Multipoint Layer 2 Services Commands
aging (VPLS)
To Next Page
Loading...
Need help?
General
