Examples
This example shows you how to configure a G.8032 ring profile:
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# ethernet ring g8032 profile p1
RP/0/RSP0/CPU0:router(config-g8032-ring-profile)#
Related Commands
DescriptionCommand
Enables G.8032 ring mode and enters the G.8032 configuration
submode.
ethernet ring g8032, on page 251
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
254
Multipoint Layer 2 Services Commands
ethernet ring g8032 profile
To Next Page
Loading...
Need help?
General
